a note from idec: due to continuous product improvements, specifications are subject to change without notice. for up-to-date information, or to request a full copy of this catalog, please visit us at www.idec.com u905 catalog section
display lights lt1 series b-4 usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b lt1 series ?signalight light towers display lights with a tower of advantages key features of the lt1 series signalight towers include: custom con?urations meet your speci?ations simply select your ?sh preference, lens colors, number of tiers, mounting style, and voltage choice of led or incandescent lamps led lamps provide over 100,000 hours of service life and are interchangeable with incandescent bulbs incandescent lamps (available up to 10 watts) are vibration- resistant and provide a 2,000 hour service life replace the bulbs independently; no need to disassemble the entire unit heat- and shock-resistant polycarbonate lenses flashing models allow each lamp to be ?shed or steady choice of metallic base or cost-saving plastic base color-coded wires make assembly and wiring easy mounting options include base and pole mount base mount pole mount (with ??bracket) ul listed file no. e70646 c - ul listed file no. e70646 (equivalent to csa)
display lights selection guide b-2 usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b lt1 series ?led or incandescent light towers lt1a lt1d lt1h lt1k page b? description incandescent led steady flashing steady flashing features ?select your ?sh preference, lens colors, base, number of tiers, mounting style, and voltage ?replace the bulbs independently; there is no need to disassemble the entire unit ?heat- and shock-resistant polycarbonate lenses ?choice of metallic base or cost-saving plastic base ?color-coded wires make assembly and wiring easy nominal voltage 12v ac/dc, 24v ac/dc , 120v ac , 240v ac (incandescent only) lamp style t20 glass bulb, ba15d lamp base ba15d lamp base lens colors red, yellow, green, blue, white degree of protection ip20 (for indoor use only) mounting base mount (three stud) pole mount (horizontal or vertical surface) npt mount (via adaptor) to 1/2" or 3/4" npt conduit; install in an upright position optional pole height 10.75" (273mm) lens diameter 2.20" (56mm) ratings/approvals selection guides ul listed file no. e70646 c-ul listed file no. e70646 (equivalent to csa)
display lights lt1 series usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b-5 b specifications lt1a: incandescent, non-flashing lt1d: incandescent, flashing/non-flashing lt1h: led, non-flashing lt1k: led, flashing/non-flashing nominal voltage 12v ac/dc ?0% 24v ac/dc ?0% 120v ac ?0% 240v ac ?0% internal fuse rating 3.15a 3.15a 1a 1a lamp rating led 12v ac/dc 24v ac/dc 120v ac n/a incandescent 12v, 5w 30v, 10w 120v, 7w 240v, 10w current required per lamp led n/a incandescent 0.4a ?0% 0.3a ?0% 0.06a ?0% 0.05a ?0% external contact capacity 5a 5a 2a 1a in-rush current per lamp led not applicable incandescent below 4.0a below 3.0a below 0.6a below 0.5a lamp style led ba15d lamp base incandescent t20 glass bulb, ba15d lamp base lamp life-span led 100,000 hours (minimum) incandescent 2,000 hours (average) lens colors red, yellow, green, blue, white lens diameter 2.20" (56mm) maximum tiers 5 degree of protection ip20 (for indoor use only), nema1 flash rate led: 45/minute ?0% (lt1k only) incandescent: 80/minute ?0% (lt1d only) insulation resistance more than 3m w by a dc 500v megger voltage resistance 1,500v ac for 1 minute operating range ?0 to +40? (lt1a), ?0 to +40? (lt1d), 15 to 90% relative humidity vibration resistance 2.2g maximum mounting base mount (three stud) pole mount (horizontal or vertical surface) npt mount (via adaptor) to 1/2" or 3/4" npt conduit install in an upright position optional pole height 10.75" (273mm) approvals wire size non-?shing (steady): 20 awg flashing: 18 awg and 20 awg red green yellow white blue 12vdc 54ma 78ma 54ma 54ma 78ma 24vdc 54ma 39ma 54ma 54ma 39ma 120vac 30ma 30ma 30ma 30ma 30ma ul listed file no. e70646 c-ul listed file no. e70646 (equivalent to csa)
display lights lt1 series b-6 usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b part number guide part numbers: assembled parts examples: assembled parts box no. description code light source and function non-?shing (steady), incandescent lamp a flashing/non-?shing, incandescent lamp d non-?shing (steady), led lamp h flashing/non-?shing, led lamp k number of tiers maximum of 5 tiers 1 5 a voltage 12v ac/dc 1 24v ac/dc 2 120v ac 5 240v ac (incandescent only) 8 ? mounting style and base designation base mount, plastic base 1 base mount, metallic base 2 pole mount, plastic base 3 pole mount, metallic base 4 ? ? color code red r yellow y green g blue s white w part no. description lt1a-354-rrr non-?shing incandescent, 3 tiers, 120v ac, pole-mount, metallic base, all red lenses lt1d-182-s flashing/non-?shing incandescent, 1 tier, 240v ac, base- mount, metallic base, blue lens lt1d-221-rs flashing/non-?shing incandescent, 2 tier, 24v ac/dc, base-mount, plastic base, red and blue lenses lt1h-412-rgyw non-?shing led, 4 tier, 12v ac/dc, base-mount, metallic base, red, green, yellow, and white lenses lt1k-554-gsrgr flashing/non-?shing led, 5 tier, 120v ac, pole-mount, metallic base, green, blue, red, green, and red lenses signalight part numbers (assembled) lt1 a 3 5 3 r y g to determine the appropriate signalight part number, use these numbered boxes in conjunction with the codes in the part numbers: assembled parts table below. a? ??? ? light source and function number of tiers voltage mounting style and base des- ignation color code specify lens color code from the lowest to the highest tier.
display lights lt1 series usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b-7 b part numbers: sub-assemblies examples: sub-assemblies sub-components description part no. notes examples flashing/non-?shing (steady) light body frame lt1a-01#*$ # = number of tiers (1?) * = lamp voltage (2 = 24v ac/dc, 5 = 120v ac, 8 = 240v ac) $ = body cover (m = metallic, p = plastic) lt1a-0142m = steady light, four tiers, 24v ac/dc, metallic base flashing light body frame lt1d-01#*$ lt1d-0125p = flashing light, two tiers, 120v ac, plastic base lens lt1x-08* * = color: r = red, y = yellow, g = green, s = blue, w = white lt1x-08g = green lens 12v ac/dc led lamp ltxd-1* * = color: r = red, y = yellow, g = green, s = blue, w = white ltxd-1r = red led, 12v ac/dc 24v ac/dc led lamp ltxd-2* ltxd-2s = blue led, 24v ac/dc 120v ac led lamp ltxd-120* ltxd-120y = yellow led, 120vac 12v ac/dc b5-2 30v ac/dc incandescent lamp b5-31 120v ac incandescent lamp b5-1 240v ac incandescent lamp b5-4 mounting pole (optional) lt1z-10 complete part no. quantity sub-assembly part no. description lt1a-354-rrr 1 lt1a-0135p steady, 3 tier, 120v ac, plastic base 3 lt1x-08r lenses: all red 1 lt1x-06 top cap 3 b5-1 120v ac incandescent lamps 1 lt1z-10 pole unit lt1d-182-s 1 lt1d-0118m flashing, 1 tier, 240v ac, metallic base 1 lt1x-08s lens: blue 1 lt1x-06 top cap 1 b5-31 240v ac incandescent lamp lt1k-221-rs 1 lt1d-0122p flashing, 1 tier, 24v ac/dc, plastic base 2 lt1x-08r,s lenses: red and blue 1 lt1x-06 top cap 1 ltxd-2r 24v ac/dc led lamp, red 1 ltxd-2s 24v ac/dc led lamp, blue description quantity body frame required: 1 per unit lens(es) variable: from 1 5 top cap required: 1 per unit lamps variable: from 1 5 mounting pole optional: 1 per unit signalight part numbers (sub-assembled) 1. part numbers for led and incandescent bases are identical. 2. the assembled parts table is on page b? .
display lights lt1 series b-8 usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b part numbers: accessories/replacement parts description part no. remarks led lamp ltxd-1* 12v ac/dc see below for available colors ltxd-2* 24v ac/dc see below for available colors ltxd-120* 120v ac see below for available colors incandescent lamp b5-2 12v ac/dc, 5w b5-31 30v, 10w (for use with 24v ac/dc) b5-1 120v ac, 7w b5-4 240v ac, 10w lens lt1x-08* see below for available colors top cover lt1x-06 clear polycarbonate mounting pole lt1z-10 chrome-plated steel supplied with ?? bracket and two m22 x 1.5 hexagonal nuts pole mounting fixture lt1z-11 aluminum ?ture for mounting pole-mounted units to horizontal surface; not included with assembled signalight units npt pole adaptors lt1z-npt50 1/2" npt pole adaptor; not included with assembled signalight units lt1z-npt75 3/4" npt pole adaptor; not included with assembled signalight units signalight accessories * led and lens colors: r = red, g = green, y = yellow, w = white, and s= blue.
display lights lt1 series usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b-9 b signalight wiring common cable = (white) 3 2 1 4 5 external contact connections ac/dc lt1a/lt1h: non-flash series common cable for non-flashing (white) common cable for flashing (orange) black = negative, black/white = positive (observe polarity for dc applications) 3 2 1 4 5 external contact connections wiring is color-coded to match the number of tiers. 1 tier = r 2 tier = ry 3 tier = ryg 4 tier = rygs 5 tier = rygsw color codes: r = red y = yellow g = green s = blue w = white power source + lt1d/lt1k: flash/non-flash series signalight dimensions 2.20" (?6mm) l1 2.75" (70mm) 0.787" (20mm) 2.56" (65mm) 2.36" (60mm) 0.866" (22mm) 1.57" (40mm) 10.75" (273mm) 3.15" (80mm) 1.57" (?0mm) cord hole 0.39" (?0mm) 0.12" - 0.197" (3 - ?mm) 120 120 120 assembled base mount assembled pole mount mounting hole layout: base mounting style 0.394 " (10mm) 2.20" (?6mm) l1 2.75" (70mm) 0.787" (20mm) number of tiers l1 1 6.7" (170mm) 2 9.4" (1240mm) 3 12.2" (310mm) 4 15.0" (380mm) 5 17.7" (450mm)
display lights lt1 series b-10 usa: ( 800 ) 262-4332 or ( 408 ) 747-0550 , western canada: ( 888 ) 578-9988 or eastern canada ( 888 ) 317-4332 b adapter signalight dimensions, continued m22 x 1.5 threads 1/2" npt threads 1.47" (37mm) 1.00" (25mm) m22 x 1.5 threads 1.63" (41mm) 3/4" npt threads 1.17" (30mm) npt50 npt50 3.9" (100mm) 2.4" (60mm) 20.2" (5mm) ?.9" (73mm) ?.9" (22mm) 2?.2" x 0.3" (4.5 x 8mm) 2?0.2" x 0.4" (m4 x 10mm) 1.2" (30mm) 1.4" (35mm) 1.3" (32mm) ?.6" (47mm) 0.8" (20mm) 0.9" (21.7mm) 2.4" (60mm) 10.7" (273mm) 3.2" (80mm) pole length 11.8" (300mm) 0.5" (13mm) 1.6" (40mm) optional pole mounting base: side view optional pole mounting base: bottom view mounting bracket (provided with mounting pole) mounting pole
|
